并联机器人运动性能的研究现状及发展趋势

随着并联机器人技术的发展,其运动性能的提升成为了发展需求,指出了研究工作空间和奇异位形的必要性。以研究方法为主线,详细阐述了工作空间和奇异位形的国内外研究现状及特点,进一步提炼出个体的创新思想和面临的共同难题。通过深入分析研究方法的原理,找到了解决共同难题的突破口,同时剖析了研究中的尚存难题。结合未来的发展趋势,从结构综合和理论创新两个方面进行突破,能够为并联机器人的发展提供强劲动力。得出的结论和展望给从事这一领域的研究者们提供了参考。     

考虑局部遮挡的太阳能无人机能源控制

针对太阳能无人机在飞行状态下可能出现的太阳能电池局部遮挡情况，开展相应的太阳能电池最大功率点追踪算法和能源控制研究。通过将发光亮度引入相对吸引力计算过程对萤火虫算法进行改进，实现了局部阴影情况下太阳能电池最大功率点的高效追踪。以此为基础，设计了考虑局部遮挡情况下太阳能无人机的太阳能电池/蓄电池混合能源状态机控制规则。以"蒲公英I"无人机为例，建立了太阳能电池阵列模型，开展了考虑局部遮挡情况下太阳能电池最大功率点追踪仿真实验；基于"蒲公英I"飞行剖面，开展了考虑局部遮挡情况的混合能源控制仿真试验。研究结果表明：改进的萤火虫算法可以实现在局部阴影情况下太阳能电池最大功率点的有效跟踪，与萤火虫算法相比收敛时间更短、且功率波动幅度更小；采用改进萤火虫算法和状态机能源管理策略，在考虑局部遮挡的飞行状态下可以实现太阳能电池/蓄电池之间的合理功率分配与控制。     

小卫星侦察星座性能评估研究

针对小卫星侦察星座性能评估问题，从覆盖、成本和弹性三方面对小卫星侦察星座的性能指标进行研究，分别构建了考虑存储容量约束的覆盖能力评估模型、成本估计模型以及弹性能力评估模型。在覆盖能力评估模型中，将卫星存储容量作为约束条件，结合卫星覆盖几何模型分析了卫星对地侦察的工作条件，提出考虑存储容量的覆盖指标计算方法；通过小卫星成本模型(small satellite cost model,SSCM)对星座各分系统的成本进行估计；在弹性评估模型中，提出了星座性能损失率指标，并根据星座失效状态概率函数确定了不同失效状态下星座性能损失率的权重。将上述模型应用于SkySat和吉林一号星座的性能评估过程中，结果表明SkySat比吉林一号覆盖能力强、成本低，弹性差。提出的三个模型可用于评价星座优劣，为小卫星侦察星座的建设和性能评估工作提供参考。     

基于改进粒子群优化模糊控制的MPPT算法研究

在光照强度和温度变化时,常规的最大功率点跟踪(MPPT)算法难以快速准确地跟踪光伏系统最大功率点。针对此问题,设计了一种改进粒子群优化算法(PSO)的模糊控制器。首先,依据常规MPPT特性,设计了一种带调整因子的模糊控制算法以快速收敛到最大功率点；然后,采用参数自适应PSO对设计的模糊控制器调整因子进行动态优化。仿真结果表明:所设计的参数自适应PSO优化模糊控制器能快速准确地跟踪最大功率点,保证了MPPT的动态响应速度和稳态精度,提高了光伏系统的工作效率。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

过虚拟交班点的能量最优制导律

针对固定目标的导弹过虚拟交班点制导问题，在希尔伯特空间下，基于最优化理论设计了有无终端落角约束两种情况下的全局能量最优制导律。通过对模型进行线性化，将提出的最优制导模型转化为线性二次型最优控制问题，在此基础上利用零控脱靶量（ZEM）概念对系统模型进行降阶，并推导出解析解。设计的制导律可以使导弹准确经过虚拟交班点，并实现期望终端落角。仿真结果表明，与经典制导律对比，该制导律可以显著减少全局控制能量消耗。     

星载相控阵GNSS-R测高系统设计与实验

星载GNSS-R测高系统采用多波束相控阵天线和干涉互相关处理方式,接收北斗导航卫星和GPS导航卫星发射的L波段导航直射信号与海面反射信号,进行海面高度探测。详细介绍GNSS-R测高系统设计与实现、集成和外场试验等,外场试验不仅验证了相控阵GNSS-R测高系统功能,更重要的是验证了核心软件算法的正确性。GNSS-R测高系统适用于中尺度海洋现象的观测,可在时间和空间尺度上扩展雷达高度计的观测能力,并与之相互补充,有利于对复杂海面的中尺度结构进行较高时间分辨率的观测。GNSS-R测高仪为星载高精度海面高度探测提供了新型载荷。     

30cm离子推力器在轨环境下的工作点及热控措施研究

栅极间距变化是影响离子推力器在轨环境下从冷态条件正常点火启动的重要因素,同时也决定了离子推力器的在轨工作时机和热控实施策略。本文采用有限元仿真与地面热平衡试验验证相结合的方法,建立起30cm离子推力器有限元分析模型并进行了模型校验,之后对离子推力器在轨受太阳光照影响的栅极温度场分布和间距变化,以及推力器在5kW工况下的三个典型温度点所对应的栅极间距变化进行了仿真分析,最后考虑了主动热控干预对推力器最恶劣工作点的栅极间距变化影响。结果显示：纯太阳光照影响下的栅极组件存在周期性温度变化,栅极最大温差可达到100℃,栅间距缩小量在0.06mm~0.16mm范围内波动;在太阳光照基础上实施60W的主动热控后,栅极最大温差降低至60℃,栅间距缩小量波动范围则变为0~0.03mm;栅极最高温度点和最低温度点分别是推力器冷态启动最容易和最困难的两个工作时机点,两点所对应的启动后屏栅和加速栅最小间距分别为0.22mm和0.04mm;在10W、70W和120W的热控加热功率下,从最低温度点启动后的屏栅和加速栅最小间距分别为0.06mm、0.20mm和0.29mm;采取主动热控措施能够有效降低推力器工作过程中的栅极热形变位移峰值,且加热功率为120W即温控点温度为50℃的主动热控可以满足30cm离子推力器在轨冷态启动时的0.25mm安全栅极间距要求。     

基于空间电压矢量的软起动器变频阶段的优化及仿真

对于空间电压矢量软起动器变频阶段的负相转矩和转速振荡问题,依据电压矢量的控制方法,对频率转换点的选取实行优化。以电机负载状况来获取各个变频阶段的控制角初始值,以恒压频比原则获取控制角终值,以此对软起动器变频阶段的控制进行优化。最后对优化后的软起动器进行仿真验证,结果显示,软起动器工作在变频阶段时,在频率转换点出现的转速超调得到了改善,电流峰值有所减小,没有负转矩出现。